By Sam Bridge
Dubai Municipality has announced another milestone by entering the Guinness Book of World Records for 3D printed building
Dubai Municipality has announced another milestone by entering the Guinness Book of World Records for completing the largest 3D printed two-storey structure in the world.
The achievement is in line with the directives of Sheikh Mohammed Bin Rashid Al Maktoum, Vice President and Prime Minister of the UAE and Ruler of Dubai to construct 25 percent of the buildings in Dubai with 3D printing technology by 2030.
Dubai Municipality said it has completed a two-storey integrated building project with a height of 9.5 metres at a total area of 640 square metres through the use of 3D printing technology.
It is the largest and first 3D printed two-story structure in the world executed by undertaking 3D printing onsite directly under external working conditions and using local components, it added.
المشروع عبارة عن بناء متكامل ويشتمل على طابقين بارتفاع 9.5 متر وبمساحة إجمالية 640 متر مربع، ويعتبر أكبر وأول مبنى مطبوع في العالم، مكون من طابقين.#دبي pic.twitter.com/uecLZn8Luf— Dubai Media Office (@DXBMediaOffice) October 23, 2019
Dawoud Al Hajri, director general of Dubai Municipality said: “This project is a major turning point in the construction sector at the local and regional levels and is based on the strategy of innovation in 3D printing technologies in construction, which in turn will increase the pace and speed of execution and completion of buildings in record time, and reduce construction costs and contribute to the development of solutions to the demographics challenges by reducing the number of construction labour.
“It will also support the Emirate's sustainability trends using local materials and reduce construction waste, where printing is done electronically according to engineering plans directly without human intervention,” he added.
“The two-storey building has been designed and executed with a number of spaces that can be used as rooms or offices of different sizes. The walls are printed directly from the printer, unlike the traditional method of construction, which depends on the work of tightening wooden pieces with nuts and bolts, reinforcement and pouring of concrete and making bricks. The building has been designed with different curves and shapes through which it was tested whether it can be possible for 3D printing in the construction of a variety of designs,” said Al Hajri.
He added that the Municipality ensured that the materials used in the mixture are local materials available in the country. The printing mix was created from local materials and will be the Intellectual Property of Dubai Municipality as the holder of the rights of this mixture in the future.For all the latest construction news from the UAE and Gulf countries, follow us on Twitter and Linkedin, like us on Facebook and subscribe to our YouTube page, which is updated daily.